Skip to main content

Fence Company in Bulverde, TX for Rocky Lots and Acreage

Looking for a fence company in Bulverde, TX, that knows rocky ground? We're a short drive east on Hwy 46. We build on subdivision lots and on the acreage outside them, and we check the city and HOA rules before a single post goes in.

Wild turkeys crossing rolling pasture below a cluster of live oaks near Bulverde

Get Your FREE Estimate

CountyComal County
PermitsCity of Bulverde
From Boerneeast, along Hwy 46
ZIP codes78163

Areas and roads we work alongHwy 46 · US 281 · Cibolo Creek · Bulverde Road

From Boerne we come east on Hwy 46; US 281 runs along the east side of the city.

New Lot, Wobbly Fence? Bulverde Fence Problems We Fix

First fences on new subdivision lots over stony clay

The problem: The builder left a bare backyard, or a thin fence with posts that already wobble after the first windy season.

Why it happens here: Bulverde has grown fast, and many of the new lots sit on stony clay over fractured limestone. Without the right drill, posts get set short.

What we do: We check HOA and city rules, drill post holes into the rock, set each post in concrete, and build a cedar or pine privacy fence on posts set in the rock.

Its Own City, Its Own Rules. We Check Them First.

This is its own city in Comal County, east of Boerne along Hwy 46. Boerne's permit and site plan rules don't apply here. Construction permits and contractor registration go through the city's Building Review and Inspection office, so we check what applies to your fence before it goes up.

HOA rules matter a lot on subdivision lots. They can set the fence height, the material, the style of the top, and which side of the boards faces the street. We'd rather find that out before the estimate than after the posts are set.

On acreage outside the subdivisions, the rules are usually lighter, but it's still worth a quick check. We'll help you find out what applies to your property.

Wood privacy fence along the back line of a Bulverde subdivision lot

Rocky Lots Up Front, Long Drives Out Back

The ground here is rocky, plain and simple. Post holes hit limestone often, so we drill and set every post in concrete. On a sloped lot we either step the panels down the hill or rack them to follow the grade, depending on the style and what looks right from the house.

The work splits two ways. On subdivision lots it's mostly cedar or pine privacy fence along the back and sides, with iron across the front or around a pool. On acreage it's longer runs, pipe or wire fence, and a driveway gate at the road.

Long, sloped drives come up a lot on those bigger tracts. That slope decides whether a swing gate will clear the ground or whether a slide gate is the better fit, and it's one of the first things we look at when we come out to see the entry with you.

Why Homeowners Off Hwy 46 Call Us

  • We check city and HOA rules before the estimate is final
  • Straight price ranges up front for every fence type and gate
  • Swing vs slide gate advice based on your actual drive slope
  • Privacy fences, iron, gates and repair, all from one call

Building Fences in Bulverde's Growing Subdivisions

Bulverde is a Comal County city east of Boerne, where Hwy 46 meets US 281, with Cibolo Creek running just south of town. It has grown fast, and a lot of that growth landed on new subdivision lots that still need a first fence.

Five cities, one Bulverde. The city you live in today was put together from five separate incorporated cities, and it took twenty-two elections to make them one. That's part of why Bulverde is a patchwork of subdivisions rather than one old grid. Say you're on a newer lot: the HOA rules homeowners follow in your subdivision can be quite different from the one next door, so we read yours before we price the fence.

The old rock fences. Between 1850 and 1890, settlers in this corner of Comal County built many rock walls, laid dry and shimmed with chips. In the late 1920s and through the 1930s, ranchers sold a lot of those stone fences for extra income, and many miles of them ended up as fill for widening what became FM 1863. Say your acreage still has a stretch of old dry-laid wall along a line. It's part of the land's history, and we can build new fence to meet it instead of tearing it out.

The wild turkeys in the photo at the top belong here too. The city calls itself the Front Porch of the Texas Hill Country, and it says deer, turkey and quail are abundant around Bulverde, which is why deer fence comes up on the acreage outside the subdivisions.

The city describes its own ground as shallow soil over limestone on the high ground, with deeper clay down on the creek terraces. Up on the rock an auger stops short, so we drill post holes into the limestone and set every post in concrete. On acreage outside the subdivisions, the work shifts to longer runs and a driveway gate at the road.

Landmarks and streets we work near: Cibolo Creek (Comal and Bexar county line) · Bulverde City Hall on Cougar Bend

What Bulverde Homeowners Ask Us

Do you work inside Bulverde city limits?

Yes. The city's Building Review and Inspection office handles construction permits and contractor registration, and many subdivisions add HOA rules, so we check both before building.

My HOA has fence rules. Can you build to them?

Yes. Send us the HOA guidelines or tell us what they require, and we'll build the height, style and finish they ask for.

What does a privacy fence cost on a new subdivision lot?

A 6 ft pine or cedar privacy fence runs $25 to $45 per foot installed. For 150 ft that's $3,750 to $6,750; for 200 ft it's $5,000 to $9,000.

Does the city require a fence between homes and a commercial lot?

Yes. Where a commercial or industrial lot borders homes, the city's zoning code has the commercial owner put up a solid wall or fence at least 6 ft tall, held to 30 inches in visibility triangles. We build 6 ft and 8 ft wood privacy fence to that height.

Can you fix a fence that was built too shallow?

Yes. We reset leaning posts, drilled into the limestone where needed and set in concrete. Most repair jobs run $300 to $900; one post runs $250 to $500.

What does an automatic driveway gate cost for acreage off Hwy 46?

An automatic driveway gate runs $3,000 to $12,000 installed complete; adding an opener to an existing gate runs $1,000 to $5,000. The slope of the drive decides swing or slide.

Do you build pool fences?

Yes. Wrought iron or ornamental steel is a common choice around pools, at $40 to $75 per foot installed, with self-closing, self-latching gates.

Nearby Areas We Serve

From Bulverde, these are the closest towns we also cover, along with our home base in Boerne.

Boerne (home base) · Fence company in Spring Branch · Fence company in Fair Oaks Ranch

Bulverde sits east of Boerne, along Hwy 46.

All service areas →

Black iron driveway gate standing open on a long Hill Country drive

Book a Free Fence Estimate in Bulverde

We'll come look at your fence, check the ground and any rules that apply, and give you a free written estimate.